*Tutorial by Kim @Â Â Bugaboo, Mini, Mr. & MeÂ for her win of the Dollar Store challenge in Season 11*
Well, I’m pretty blown away to be able to share my tutorial with you here on SYTYC! Â What incredible ideas there were for Dollar Store week!
I just loved the bright colors and super soft feel of these hand towels, so the scrubby bath puppets were pretty much a must. Â To make them, all you need is:
1 towel in each color (one towel should be enough for each bath mitten AND the critters)
1 plain white “bar mop towel” (just a plain white washcloth)
Approximately 6 sponges – more or less…
Some knit scraps from your scrap pile (or use t-shirts from the dollar store!)
A few small circles of black felt
a sewing machine
a needle and thread
I did also attempt to make the little legs out of towel material. Â The idea was to create casings for each one, sewing them inside out and turning them right side out to attach them… big fail. Â Don’t do this! Â I mean, those are some ridiculously skinny casings. Â There is NO way you will be able to turn them the right way – and had I been in my right mind while starting this project I would have known that right away. Â So get yourself some scrap stretchy knit (an old shirt works great) and cut it into skinny strips about and inch or two wide. Â Pull the ends to make the strips curl up a bit. Â More on that later… Â Just don’t do this:
Alright. Â Now that we’ve established the pieces, let’s make some puppets!
Here’s the overview for the mittens. Â Pretty straightforward and you’ll make all three this way. Â Ready?
Pin your mitten right sides together. Â Use a zig-zag stitch going up one side, around the curve and down the other side. Â Leave the bottom open – you know, since you’ll want to put your hand in there.
Then trim the excess towel off.
Fold up the bottom once. Â Since you’ve used the finished edge from the towel, you don’t need to worry about fraying or double folding or anything. Â Use a zig-zag stitch and sew around the fold. Â Leave a small opening.
Cut your skinny elastic just slightly smaller than your kid’s wrist. Â Use a safety pin to thread it through the casing.
Sew the ends of the elastic together.
Sew the opening closed.
Turn your mitten right way out. Â Done!
Let’s make a turtle!
We’ll begin by assembling the limbs. Â For each one, you’ll simply put right sides together, pin, zig-zag stitch around and leave an opening to stuff them.
You’ll sew the flippers much like the mittens – up one side, around the point, down the other side, leave the bottom open.
To stuff them, cut a piece of sponge the same approximate shape as the flippers just a bit smaller. Â Then, cut the sponge shape in half so you have two of the same shape that are 1/2 the thickness of the original sponge.
And the look like this:
Turn your flippers right side out, and stuff them with the sponge shapes. Â Use a skewer to smoosh them into the right shape. Â Don’t worry about sewing the openings closed, that’ll be taken care of later.
Do the same thing for the head.
You won’t be stuffing the feet or tail. Â So just sew around them with right sides together, turn them the right way, don’t worry about the openings.
On to the crab!
Let’s take care of the pinchers.
As per previously, put the pinchers right sides together, sew around and leave the bottom open.
Tuck a stretched out strip of knit into the pinchers. Â Sew straight across the opening.
And now for the octopus. Â I’m afraid I will be horrible at explaining this. Â But I shall do my best.
Basically, you’re just making a ball with legs. Â Set your first piece right side up. Â Put your second piece on top, WRONG side up. Â Stitch down the right side, from point to point, following the curve. Â Lay these pieces out flat, right side up. Â Place the third piece on top of the second piece, WRONG side up. Â Stitch down the right side, from point to point, following the curve. Â Lay these out flat, right side up. Â Lay your fourth piece on your third piece, WRONG side up… continue in this fashion until you’ve got all five pieces sewn together, but DON’T attach the fifth piece to the first piece yet.
And here is what you DON’T want to do with the tentacles. Â Please, take my word for it. Â Just use knit.
Turn the ball right side out. Â Now, stuff it with sponges. Â Stick the knit strips inside, between the layers of sponge.
Sew up the flap. Â Just sew the last piece to the first piece, tucking the edges in. Â Then, sew across the bottom of the ball to secure the tentacles.
Trim the tentacles if you’d like. Â Tie knots along the tentacles, two or three on each. Â You know, for cuteness.
Hand stitch it to the mitten and voila!
For the eyes, I made yo-yo’s out of the plain washcloth. Â You can find an excellent tutorial for yo-yo’s here. Â I just turned them around backwards and stuffed the edges up into the yo-yo so they look puffy. Â Then I hand stitch black felt to them and hand stitched the whole eye to the critters. Â Just remember when you cut the circles out of your washcloth that the yo-yo’s will be HALF the size you cut the circle.
When you’re all done, you’ll have some seriously lovable sea critters. Â Who apparently like to kiss. Â And chase each other around the yard.
One side perfect for scrubbing,
Thanks for the votes!